平稳小波在高精度重力仪信号处理中的应用

为有效地消除噪声对重力仪测量数据的影响,提高重力异常测量值的精度,在分析平稳小波多尺度分析原理的基础上,将平稳小波应用到重力仪数据处理中,并与传统小波多尺度分析进行了对比.理论分析和仿真实验表明,平稳小波和传统小波都能在一定程度上抑制噪声对高精度重力仪测量数据的影响,但平稳小波的性能优于传统小波.     

The optical properties of the laser beam passed through a turbulent shear layer

The related fluid dynamic theory, experimental device and some preliminary results of the study of the optical properties of a laser beam passed through a turbulent shear layer are presented. The method of image processing for the determination of the optical density from a interferogram by means of a Microneye Bullet and a Microcomputer is also described.     

High pressure and thermal pasteurization effects on sweet cherry juice microbiological stability and physicochemical properties

This study evaluated high pressure processing (P1 – 400?MPa/5?min; P2 – 550?MPa/2?min) and thermal pasteurization (TP – 70°C/30?s) effects on sweet cherry juice's microbiological and physicochemical parameters, during four weeks of refrigerated storage. All treatments reduced the microbiological load to undetectable levels not affecting total soluble solids and titratable acidity. The pH increased with all treatments, however, it decreased during storage. Phenols were differently affected: TP increased them by 6%, P1 had no effect while P2 decreased them by 11%. During storage, phenols in control and TP samples decreased by 26% and 20%, P1 samples decreased them by 11% whereas P2 showed no variation. TP had no effect on anthocyanins, while pressure treatments increased them by 8%. Anthocyanins decreased during storage, particularly in the control and P1 (decreasing 41%). All treatments had no effect on antioxidant activity until the 14th day, thereafter high pressure processing samples showed the highest antioxidant activity.     

Large‐acceptance diamond planar refractive lenses manufactured by laser cutting

For the first time, single‐crystal diamond planar refractive lenses have been fabricated by laser micromachining in 300 µm‐thick diamond plates which were grown by chemical vapour deposition. Linear lenses with apertures up to 1 mm and parabola apex radii up to 500 µm were manufactured and tested at the ESRF ID06 beamline. The large acceptance of these lenses allows them to be used as beam‐conditioning elements. Owing to the unsurpassed thermal properties of single‐crystal diamond, these lenses should be suitable to withstand the extreme flux densities expected at the planned fourth‐generation X‐ray sources.     

Development of variable‐magnification X‐ray Bragg optics

A novel X‐ray Bragg optics is proposed for variable‐magnification of an X‐ray beam. This X‐ray Bragg optics is composed of two magnifiers in a crossed arrangement, and the magnification factor, M, is controlled through the azimuth angle of each magnifier. The basic properties of the X‐ray optics such as the magnification factor, image transformation matrix and intrinsic acceptance angle are described based on the dynamical theory of X‐ray diffraction. The feasibility of the variable‐magnification X‐ray Bragg optics was verified at the vertical‐wiggler beamline BL‐14B of the Photon Factory. For X‐ray Bragg magnifiers, Si(220) crystals with an asymmetric angle of 14° were used. The magnification factor was calculated to be tunable between 0.1 and 10.0 at a wavelength of 0.112 nm. At various magnification factors (M≥ 1.0), X‐ray images of a nylon mesh were observed with an air‐cooled X‐ray CCD camera. Image deformation caused by the optics could be corrected by using a 2 × 2 transformation matrix and bilinear interpolation method. Not only absorption‐contrast but also edge‐contrast due to Fresnel diffraction was observed in the magnified images.     

某机载瞄准系统精度评估测试方法

为了评估某型机载瞄准系统的精度,根据飞行试验参数测试需要,提出了通过图像测量与DGPS融合处理方法进行瞄准精度评估的试验方案。该方案利用飞行试验获取的图像数据与其他测量数据相结合,建立精度评估的方法,该评估方法在该机载武器瞄准系统精度评估得到应用,并且可在同类试验课题中推广应用。     

基于LabVIEW的砝码自动检定系统设计与实现

针对目前砝码检定工作操作过程复杂、检定效率低等问题,设计了一种基于LabVIEW的砝码自动检定系统。在符合砝码检定规程的情况下,系统实现了检定数据实时采集、数据处理、生成原始记录、管理标准器、查询历史数据和衡器控制等功能。相对现有的砝码检定方法有操作简单、高效、程序移植性好等优点。系统由主控计算机、串口转无线扩展卡、多台衡器设备及相应的标准砝码装置组成。通过使用串口转Wi-Fi模块,系统可实现控制多台衡器设备的需求。实验结果证明,系统运行稳定可靠,采集数据准确,容易扩展,且大幅度减轻了检定人员的劳动强度,在计量检定工作中具有一定的实用和推广价值。     

基于AltiVec技术的PowerPC处理器矢量运算性能测试

基于AltiVec技术的PowerPC处理器,在很多嵌入式信号处理领域已经取代传统的DSP处理器成为信号处理器件的首选。为了评估基于AltiVec技术的PowerPC处理器的矢量运算性能和信号处理能力,选取MPC8641D处理器为硬件测试平台,采用符合VSIPL标准的VSI/Pro Core矢量库和ixlibsav矢量库,通过测试复乘和FFT典型算法不同类型的运算时间,对AltiVec处理单元的矢量运算性能进行了测试评估。通过对测试结果的分析,基于AltiVec技术的PowerPC处理器具备强大的矢量运算处理性能,可以满足嵌入式数字信号处理技术对高性能处理器的需求。     

基于CAN总线的遥测数据处理模块软件设计

随着飞行器电子综合化技术的发展,数据总线在飞行器中得到大量应用。为满足某飞行器总线系统测量的需求,本文设计了一种基于CAN总线的遥测数据处理模块。硬件部分主要由CAN总线驱动器模块、DSP数字信号处理模块、FPGA逻辑处理模块组成。软件设计包括TMS320F28335的初始化,CAN总线数据处理和外部中断处理三部分。该模块用于某飞行器双路CAN总线数据的采集及处理,并经过了多次飞行试验验证。该模块简化了系统设计,实现了高速、可靠的CAN总线遥测数据处理。     

基于机器视觉的移动工件抓取和装配的研究

针对工业生产线上某产品上下盖自动装配的问题,运用运动控制理论与机器视觉相结合,搭建了一套模拟工业生产线产品装配系统。首先利用工业相机对进入视场的工件进行单帧图像采集,获取图像数据;然后利用OpenCV对数字图像进行处理,包括中值滤波、阈值分割、孔洞填充、边缘提取来获取数字图像的特征;之后通过质心法结合矩形拟合计算出工件的质心坐标和偏转角度;最后引导六轴机械臂抓取产品的时候能根据图像处理结果进行纠偏和补偿。该系统采用平面棋盘格标定板对工业相机进行了标定,并且在线进行了验证,实验结果表明,工件抓取和装配成功率为100%,满足工业现场的装配精度要求。